Potentiostat/ Galvanostat, with Wave Generator

Contact our technical department at 518-297-3208 for additional information, a quote, or any technical questions you may have.

Model N600-HAB151 is designed to provide a complete potentiostat/galvanostat/function generator instrument for electrochemical research. This unit provide a high quality portable system capable of voltammetry, coulometry, automatic polarization and other studies. This unit is a combination of the N600-HA151 Potentiostat and the N600-HB111A Function Generator. This combination represents the accumulation of our know-how and experience over the past 35 years. The potentiostat/galvanostat portion with a maximum output of ±15V/±1A and six current ranges (the lowest range:±10µA) is adequate for most electrolysis tests and corrosion studies. Also included in this portion are an external control input, a current detecting filter, and warning lamps for "OUT-OF-CONTROL", "POTENTIAL-OVER", and "CURRENT-OVER". The function generator portion utilizes analog circuitry to yield smooth slopes. The function generator offers a wide scanning speed range (0.1mV/sec.~5000V/min) and a potential setting range of -5.0V to +5.0V. The STOP, HOLD, and REVERSE buttons are also included. This model consists of a potentiostat, a galvanostat, an electrometer, and a function generator. The function generator portion is connected to the rest of the unit via an F.G. SET ON/OFF switch. Connecting this model to a data logger via the analog port permits the storage of data. We recommend connecting the data logger to your PC via the digital port to retrieve the data and analyzing the results in Excel or your existing software.

As a Potentiostat:
• Maximum output : ±15V, ±1A
• Current measuring range : ±1A, ±100mA, ±10mA, ±1mA, ±100µA, ±10µA (6 ranges)
• Maximum control potential : ±10V
• Control accuracy : As a Galvanostat: Not more than ±1% of the set current range fullscale
• Maximum output : ±1A, ±15V
• Current setting range : ±1A, ±100mA, ±10mA, ±1mA, ±100µA, ±10µA (6 ranges)
• Current setting accuracy : As an Electrometer:
• Input resistance : 10¹⁰ Ω and more
• Bias current : 10¹⁰ Ω and more
• Response time : Recording Output:
• Potential recording output : Input/output conversion ratio is 1 : 1
• Current recording output : 1V output for every range full scale

As a function generator
• Wave forms : Ramp, One-shot triangle, One-shot double triangle, Repetitive triangle
• Setting potentials : Range -5,000V~+5,000V Setting Initial, upper, and lower potentials can be set independently (INITIAL, HIGH, LOW) Setting accuracy Setting accuracy
• Switches : START/STOP; HOLD(Output potential drift <±0.001mV/sec.); REVERSE
• Indicator lamps : STOP LED; START LED; HOLD LED; UP LED; DOWN LED

Power consumption: 20VA at standby mode ; 100VA at maximum load

WEIGHT AND DIMENSIONS
Size: 435mmx100mmx360mm (W x H x D) 17.1"x3.9"x14.2"(W x H x D)
Net Weight : 7.7kg./17.0 lbs.