Contact Nouri Dassi at 518-297-3208 for information, quotes, or any questions you may have. For a physical demonstration in your laboratory, please schedule an appointment.



Model N600-HAB151 is designed to provide a complete potentiostat/galvanostat/function generator instrument for electrochemical research. This unit provide a high quality portable system capable of voltammetry, coulometry, automatic polarization and other studies.



This unit is a combination of the N600-HA151 Potentiostat and the N600-HB111 Function Generator. This combination represents the accumulation of our know-how and experience over the past 35 years.



The potentiostat/galvanostat portion with a maximum output of ±15V/±1A and six current ranges (the lowest range:±10µA) is adequate for most electrolysis tests and corrosion studies. Also included in this portion are an external control input, a current detecting filter, and warning lamps for "OUT-OF-CONTROL", "POTENTIAL-OVER", and "CURRENT-OVER".



The function generator portion utilizes analog circuitry to yield smooth slopes. The function generator offers a wide scanning speed range (0.1mV/sec.~5000V/min) and a potential setting range of -5.0V to +5.0V. The STOP, HOLD, and REVERSE buttons are also included.



This model consists of a potentiostat, a galvanostat, an electrometer, and a function generator. The function generator portion is connected to the rest of the unit via an F.G. SET ON/OFF switch.



Connecting this model to a data logger via the analog port permits the storage of data. We recommend connecting the data logger to your PC via the digital port to retrieve the data and analyzing the results in Excel or your existing software.



As a Potentiostat:


• Maximum output : ±15V, ±1A


• Current measuring range : ±1A, ±100mA, ±10mA, ±1mA, ±100µA, ±10µA (6 ranges)


• Maximum control potential : ±10V


• Control accuracy : <±3mV


• Response time : <50µsec.


• Reference input impedance :



As a Galvanostat:


• Maximum output : ±1A, ±15V


• Current setting range : ±1A, ±100mA, ±10mA, ±1mA, ±100µA, ±10µA (6 ranges)


• Current setting accuracy : <±1% of range full scale


• Response time : <50µsec.



As an Electrometer:


• Input resistance :


• Bias current :


• Response time : <10µsec.


• Conversion accuracy : <±0.1% of input potential


• Potential display range : ±2V and ±10V full scale (Digital display)



Recording Output:


• Potential recording output : Input/output conversion ratio is 1 : 1


• Current recording output : 1V output for every range full scale



As a function generator


• Wave forms : Ramp


One-shot triangle


One-shot double triangle


Repetitive triangle


• Setting potentials :


Range -5,000V~+5,000V


Setting Initial, upper, and lower potentials can be set independently (INITIAL, HIGH, LOW)


Setting accuracy <±1%(setting potential) ±20mV


• Scanning speed :


Setting 1


Setting 2 1. 2, 5


Setting units mV/sec, 100mV/min


mV/sec. 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000, 5000,



mV/min. 10, 20, 50, 100, 200, 500, 1000, 2000, 5000,



Setting accuracy


• Switches : START/STOP; HOLD(Output potential drift <±0.001mV/sec.); REVERSE


• Indicator lamps : STOP LED; START LED; HOLD LED; UP LED; DOWN LED



Power consumption:

20VA at standby mode ; 100VA at maximum load



Physical dimensions: 435(W)x100(H)x360(D)mm/17.1(W)x3.9(H)x14.2(D)"



Weight : 7.7kg./17.0lbs.